K-Tuned Billet Shifter Mounting Base Plates

KTD-BIL-ACC

Continue Shopping or Checkout

*FREE SHIPPING

Ships in 1-5 business days. 


*There are 2 versions of the Billet Shifter Base Plate. The first type is for RSX Type-S, and this is the standard option used for k20a/a2/z1 swaps. The second type is 03-07 Accord. Please read below for descriptions of both.
 
Acura RSX Type-S
The K-Tuned Billet Shifter Base Plate (KTD-BIL-SHP) is designed to install an RSX Type-S or comparable shifter box without cutting a hole in the exhaust tunnel of the chassis. This setup is preferred by many racers, esp. road course racers, because it mounts the shifter higher in the vehicle, keeping it closer to the driver and the steering. It also leaves a lot more room below the car for large exhaust systems.

The Shifter Base Plate was designed to route your shifter cables inside the car. Generally users set them up to exit through the heater hose hole in the firewall. Note that we assuming that the heater core has been deleted on most race cars. We also want users to be aware that this shifter setup does not clear any interior panels or center consoles on any chassis.
 
03-07 Honda Accord
The K-Tuned Billet Shifter Base Plate (KTD-BIL-ACC) is designed to install a 03-07 OEM Honda Accord shifter box without cutting a hole in the exhaust tunnel of the chassis. This setup is preferred by many racers, esp. road course racers, because it mounts the shifter higher in the vehicle, keeping it closer to the driver and the steering. It also leaves a lot more room below the car for large exhaust systems.
 
The Shifter Base Plate was designed to route your shifter cables inside the car. Generally users set them up to exit through the heater hose hole in the firewall. Note that this design works assuming the heater core has been removed. K-Tuned also wants users to be aware that this shifter setup does not clear any interior panels or center consoles on any chassis.
 
This shifter setup is gaining in popularity because it can be used on a K-Swap car with the newer 06-11 Civic SI trans (also referred to as the K20Z3 trans). A special cable bracket can be ordered as an option to complete the K20Z3 trans setup.
 
Here are the Honda part numbers for the shifter and cables that you will need to use with this base plate:
 
Accord Shifter Box : 54100-SDA-A01
Accord Shifter Cable Set : 54310-SDA-L02


Related Items